Could someone tell me where exactly where in MCC I can specify the sex that I want for marriages (same sex or opposite?) I would have thought it would have been in population.
If you want to change the global setting, you might try these settings on an ingame computer/tablet:
Computer:MCCC > MC Pregnancy > Spouse Sim Selection > Spouse Gender
Allowable genders for the spouse sim to be. When Marriage/SameSexPercentage is greater than zero, this is used to determine valid genders.
Computer:MCCC > MC Pregnancy > Spouse Sim Selection > Same Sex Percentage
This setting will be used during spouse selection if both Sims being tested have the same gender. In that case, a random roll against the percentage will be made to determine whether to allow that marriage. The 'Spouse Gender' settings have to allow same sex marriages to occur through the random process. Note that if the random percentage determines to not allow same-sex partners for a specific target Sim, that same Sim will be bypassed for all same-sex marriages for the current marriage cycle.
Bonxie: Great Skua, stercorarius skua. Meet me on Fair Isle.
This release has been tested to be working with (but does not require) GTW, OR, Get Together, Dine Out, City Life, Vampires, Parenthood, Cats & Dogs, Jungle Adventures, Seasons, Get Famous, Strangeville, Island Living, Realm of Magic, University Living, Eco Living, Journey to Batuu, Snowy Escape and the patch released January 21, 2021 - PC: 1.70.84.1020 / Mac: 1.70.84.1220.
Versions before this most likely won't work, so don’t be surprised if that’s the case!
The mod folder will look more or less like this after MCCC 8.0.0 installation/update:
✘ Check the CC and Mods in your game and use current versions only. Be careful when using outdated or orphaned DLC. If you get an orange error message referring to a Last Exception, the most probably reason is broken 3rd party stuff.
As proof of installation the welcome screen of MCCC 8.0.0 looks like this:
Attention: Because of compatibility issues MCCC will no longer load and run if the ArtURLwww Pregnancy Mega Mod (PMM) is in use in the same game. The players can still choose to use PMM if they wish. MCCC will just not work if it’s in use.
Is there any way I can specify which sim I'd like an unplayed sim to marry? My sims always marry random people after I specifically set them up with a particular person. Thank you!
I have been looking into ways to completely reset your MC Command Centre settings back to default, and I have tried things like deleting the TXT file, and deleting the settings CFG file, and this didn't work. Even wiping it and reinstalling completely doesn't work. Does anybody know how to do this?
Is there any way I can specify which sim I'd like an unplayed sim to marry? My sims always marry random people after I specifically set them up with a particular person. Thank you!
Try the following command from the sim MCCC menu for instant pregnancy: Sim:MCCC > MC Pregnancy > Pregnancy Start
Available for both active and non active sims. If there is no Spouse for the selected Sim, a Sim picker dialog will pop-up that allows the player to choose another Sim to become the seed for the pregnancy. All Sims that match the valid pregnancy ages and genders defined by the players will show-up on the list. If the dialog is closed without selecting a Sim, then the pregnant Sim will function as both parents for the pregnancy as before.
Bonxie: Great Skua, stercorarius skua. Meet me on Fair Isle.
I have been looking into ways to completely reset your MC Command Centre settings back to default, and I have tried things like deleting the TXT file, and deleting the settings CFG file, and this didn't work. Even wiping it and reinstalling completely doesn't work. Does anybody know how to do this?
Thanks so much in advance!
That's strange. Are you sure, you're in the right folder?
Deleting the mc_settings.cfg will reset all MCCC settings to default.
Just checked it and it really does.
With the new MCCC version 8.0.0 we have a new command to reset MCCC from the computer menu: Computer:MCCC > Reset Settings... > Reset ALL Settings
It's the lowest menu entry in the main menu.
Performing this action will reset all MCCC settings for all modules back to the original default settings. You should save your game before performing this action, and you'll have to restart your game after it's completed!
If you want to reset only one particular module of MCCC you might try the following command from the computer menu: Computer:MCCC > Reset Settings... > Reset Module of Choice
Performing this action will reset all settings for the specified module back to the original default settings.
As I said this a new feature of the latest MCCC version.
Make sure to run version 8.0.0.
You might find the download links in my release post above.
Bonxie: Great Skua, stercorarius skua. Meet me on Fair Isle.
As announced by EA we're expecting the next Sims 4 game update tomorrow, Thursday, Feb 25th!
It's hard to tell what might happen.
Might be game breaking or not - nobody knows.
With no pack release announced, there will be probably only some bug fixes.
There might be also a MCCC hotfix, but as always it will take its time.
You know @Deaderpool and his willingness to work on this matter, so I'm convinced,
that there will be a solution in a reasonable time frame if necessary.
I'm new to the control center and i followed the instructions directly. The game recognizes it when it loads up but when i click on a sim the control center doesn't appear on the pie menu. I have no other mods installed.
I'm new to the control center and i followed the instructions directly. The game recognizes it when it loads up but when i click on a sim the control center doesn't appear on the pie menu. I have no other mods installed.
get a computer . i mean for your sims if it shows up there your good.
i love deadpool again. oh i always have just sometimes i'm quiet about it. my sim was bathing her toddler son and somehow got stuck in the tub but i manged to fix it with teleport.
I'm new to the control center and i followed the instructions directly. The game recognizes it when it loads up but when i click on a sim the control center doesn't appear on the pie menu. I have no other mods installed.
get a computer . i mean for your sims if it shows up there your good.
I clicked on a computer and nothing shows up. I have version 8.0.0
I'm new to the control center and i followed the instructions directly. The game recognizes it when it loads up but when i click on a sim the control center doesn't appear on the pie menu. I have no other mods installed.
Are your script mods disabled after the patch on Thursday?
If they are enabled, in which subfolder level do you store the MCCC files?
Bonxie: Great Skua, stercorarius skua. Meet me on Fair Isle.
I'm new to the control center and i followed the instructions directly. The game recognizes it when it loads up but when i click on a sim the control center doesn't appear on the pie menu. I have no other mods installed.
Are your script mods disabled after the patch on Thursday?
If they are enabled, in which subfolder level do you store the MCCC files?
I read the documentation and i didn't have script's enabled! D'oh!
I'm new to the control center and i followed the instructions directly. The game recognizes it when it loads up but when i click on a sim the control center doesn't appear on the pie menu. I have no other mods installed.
Are your script mods disabled after the patch on Thursday?
If they are enabled, in which subfolder level do you store the MCCC files?
I read the documentation and i didn't have script's enabled! D'oh!
thats real easy to miss. i didn't start using mc right away so one day i decied to try it and icouldn't get the thing to turn blue like the pic. in frustration i hit something and the next thing i knew mc was installed. so of course the next day it updated and i had to try and remember what i did.
Is there any way I can specify which sim I'd like an unplayed sim to marry? My sims always marry random people after I specifically set them up with a particular person. Thank you!
Try the following command from the sim MCCC menu for instant pregnancy: Sim:MCCC > MC Pregnancy > Pregnancy Start
Available for both active and non active sims. If there is no Spouse for the selected Sim, a Sim picker dialog will pop-up that allows the player to choose another Sim to become the seed for the pregnancy. All Sims that match the valid pregnancy ages and genders defined by the players will show-up on the list. If the dialog is closed without selecting a Sim, then the pregnant Sim will function as both parents for the pregnancy as before.
i'm having an issue with the maximum household setting. i've set it to 12, saved and exited the game, and when i open it again, i still do not have the option to add another sim to my household. am i missing something?
You cannot use the standard Sims 4 methods for adding Sims to households if you have households of more than 8 Sims. It is hard-coded in the Sims 4 UI code for Manage Households and CAS to only allow 8 Sims. In the same way that you can't use the "Edit Households" option of CAS with large households, you also can't add/remove Sims in the normal Sims 4 manner.
Adding Additional Sims
Adding Sims to households can either be done using the Testing Cheats method (if Testing Cheats are enabled) of shift-clicking on a Sim and adding them to your family, or by using the “sim_move” command as documented in the MC Command Center module's documentation. “sim_move” can be used for moving between different households or adding them to the active household.
Note: Having more than 8 Sims can cause issues, like crashing (usually during saving) as well as mess with the Roommate system. Not all computers may be able to handle having more than 8 Sims. Therefore we strongly recommend to not use this option for long term game play.
I have many families that have more than eight sims, they have existed for years in the same save. There are no issues with crashing. The only problem being they will be deleted in CAS if you try and load the whole family.
Will any changes I make to my family while using this still be present after removing it once I’m done with this storyline I’m working on?
Depends on the settings you're using. Things like changing fittness or relationships will stay after you removed MCCC. But there are some settings which might cause issues: for example the age spans. If they are set to long values, your sims might age up or die once MCCC is removed. Also altering game speed with MCCC is a bit tricky if MCCC is removed again.
Bonxie: Great Skua, stercorarius skua. Meet me on Fair Isle.
Comments
If you want to change the global setting, you might try these settings on an ingame computer/tablet:
Computer:MCCC > MC Pregnancy > Spouse Sim Selection > Spouse Gender
Allowable genders for the spouse sim to be. When Marriage/SameSexPercentage is greater than zero, this is used to determine valid genders.
Computer:MCCC > MC Pregnancy > Spouse Sim Selection > Same Sex Percentage
This setting will be used during spouse selection if both Sims being tested have the same gender. In that case, a random roll against the percentage will be made to determine whether to allow that marriage. The 'Spouse Gender' settings have to allow same sex marriages to occur through the random process. Note that if the random percentage determines to not allow same-sex partners for a specific target Sim, that same Sim will be bypassed for all same-sex marriages for the current marriage cycle.
Find the download link on this page:
https://deaderpool-mccc.com/#/releases
Alternative DL site, just in case you're facing issues.
https://www.patreon.com/posts/mc-command-8-0-0-47623506 - FREE DOWNLOAD!
Find the complete change log here:
https://deaderpoolmc.tumblr.com/private/639948300352733184/tumblr_qFaGIDzFvHBIW1cXp
An installation guide can be found here:
https://deaderpool-mccc.com/#/help/installation
If you're experiencing problems with the installation, look into the troubleshooting guide:
https://deaderpool-mccc.com/#/help/troubleshooting
Find the FAQ and the answers to fix your MCCC related issues here:
https://deaderpool-mccc.com/#/help/faq
This release has been tested to be working with (but does not require) GTW, OR, Get Together, Dine Out, City Life, Vampires, Parenthood, Cats & Dogs, Jungle Adventures, Seasons, Get Famous, Strangeville, Island Living, Realm of Magic, University Living, Eco Living, Journey to Batuu, Snowy Escape and the patch released January 21, 2021 - PC: 1.70.84.1020 / Mac: 1.70.84.1220.
Versions before this most likely won't work, so don’t be surprised if that’s the case!
The mod folder will look more or less like this after MCCC 8.0.0 installation/update:
✘ Check the CC and Mods in your game and use current versions only. Be careful when using outdated or orphaned DLC. If you get an orange error message referring to a Last Exception, the most probably reason is broken 3rd party stuff.
As proof of installation the welcome screen of MCCC 8.0.0 looks like this:
Attention: Because of compatibility issues MCCC will no longer load and run if the ArtURLwww Pregnancy Mega Mod (PMM) is in use in the same game. The players can still choose to use PMM if they wish. MCCC will just not work if it’s in use.
Legacy players (32-bit) should keep MCCC version 6.6.0:
https://www.patreon.com/posts/mc-command-6-6-0-31490960 - FREE DOWNLOAD!
If you have any questions please ask,
or visit our Discord: https://discord.gg/mccc
☆☆☆ Have Fun! ☆☆☆
#MCCC #Patch #Update
I have been looking into ways to completely reset your MC Command Centre settings back to default, and I have tried things like deleting the TXT file, and deleting the settings CFG file, and this didn't work. Even wiping it and reinstalling completely doesn't work. Does anybody know how to do this?
Thanks so much in advance!
Try the following command from the sim MCCC menu for instant pregnancy:
Sim:MCCC > MC Pregnancy > Pregnancy Start
Available for both active and non active sims. If there is no Spouse for the selected Sim, a Sim picker dialog will pop-up that allows the player to choose another Sim to become the seed for the pregnancy. All Sims that match the valid pregnancy ages and genders defined by the players will show-up on the list. If the dialog is closed without selecting a Sim, then the pregnant Sim will function as both parents for the pregnancy as before.
That's strange. Are you sure, you're in the right folder?
Deleting the mc_settings.cfg will reset all MCCC settings to default.
Just checked it and it really does.
With the new MCCC version 8.0.0 we have a new command to reset MCCC from the computer menu:
Computer:MCCC > Reset Settings... > Reset ALL Settings
It's the lowest menu entry in the main menu.
Performing this action will reset all MCCC settings for all modules back to the original default settings. You should save your game before performing this action, and you'll have to restart your game after it's completed!
If you want to reset only one particular module of MCCC you might try the following command from the computer menu:
Computer:MCCC > Reset Settings... > Reset Module of Choice
Performing this action will reset all settings for the specified module back to the original default settings.
As I said this a new feature of the latest MCCC version.
Make sure to run version 8.0.0.
You might find the download links in my release post above.
As announced by EA we're expecting the next Sims 4 game update tomorrow, Thursday, Feb 25th!
It's hard to tell what might happen.
Might be game breaking or not - nobody knows.
With no pack release announced, there will be probably only some bug fixes.
There might be also a MCCC hotfix, but as always it will take its time.
You know @Deaderpool and his willingness to work on this matter, so I'm convinced,
that there will be a solution in a reasonable time frame if necessary.
Have a look at this post https://forums.thesims.com/en_US/discussion/comment/17521730/#Comment_17521730 for some patch prep tips.
Join our Discord MCCC community!
Get support not only for MCCC issues but for all game related problems including lastException file analysis.
- Live chat with hundreds of fellow MCCC users from all over the world
- Live chat with some well-known Mod creators
- Live support from the legendary MCCC support team, even in different languages (i. e. Korean, French, Spanish, Russian, German)
- Live support even from MCCC creator Deaderpool
https://discord.gg/mcccOne of the biggest Sims 4 Discord servers!
#MCCC #Patch #Update
http://www.getfreeebooks.com/star-trek-original-series-fan-fiction-trilogy/
there seems to be no issues with the current MCCC Version 8.0.0
There have been no errors reported so far after that EA update.
Everything seems to work as expected.
Please make sure, that you use the latest MCCC Version 8.0.0.
The older versions will certainly not work with the new patch.
Find the download link on this page:
https://deaderpool-mccc.com/#/releases
Alternative DL site, just in case you're facing issues.
https://www.patreon.com/posts/mc-command-8-0-0-47623506 - FREE DOWNLOAD!
If you are a Legacy user, stay on MCCC version 6.6.0.
https://www.patreon.com/posts/mc-command-6-6-0-31490960 - FREE DOWNLOAD!
If you have any questions please ask,
or visit our Discord: https://discord.gg/mccc
☆☆☆ Have Fun! ☆☆☆
#MCCC #Patch #Update
Will it allow to change autonomy in all traits?
I want to download mccc but i have a lot of autonomy mods that maybe i can delete anfd use the tuner, but i can't understand how it works...
http://www.getfreeebooks.com/star-trek-original-series-fan-fiction-trilogy/
Have a look at the description:
https://deaderpool-mccc.com/#/doc/automation
Thanks!
get a computer . i mean for your sims if it shows up there your good.
I clicked on a computer and nothing shows up. I have version 8.0.0
Are your script mods disabled after the patch on Thursday?
If they are enabled, in which subfolder level do you store the MCCC files?
I read the documentation and i didn't have script's enabled! D'oh!
thats real easy to miss. i didn't start using mc right away so one day i decied to try it and icouldn't get the thing to turn blue like the pic. in frustration i hit something and the next thing i knew mc was installed. so of course the next day it updated and i had to try and remember what i did.
Thank you!
I have many families that have more than eight sims, they have existed for years in the same save. There are no issues with crashing. The only problem being they will be deleted in CAS if you try and load the whole family.
Depends on the settings you're using. Things like changing fittness or relationships will stay after you removed MCCC. But there are some settings which might cause issues: for example the age spans. If they are set to long values, your sims might age up or die once MCCC is removed. Also altering game speed with MCCC is a bit tricky if MCCC is removed again.